List of mobile codes in Pakistan

This article may require cleaning up to meet Wikipedia's quality standards. Please improve this article if you can. The talk page may contain suggestions. (October 2007) (Consider using more specific clean up instructions.)

Original numbering system

List of mobile network providers and their original codes. After 29 April 2010 there has been a change in mobile numbering system in Pakistan.
'''''''موبائل نیٹ ورک فراہم کرنے کے اور ان کی اصل کوڈ کے لئے فہرست. 29 اپریل 2010 کے بعد پاکستان میں ایک موبائل نمبر سسٹم میں تبدیل کیا گیا ہے. ''''

Wireless Provider	Original Codes
Mobilink موبی	0300,0301,0302,0303,0305,0306,0307,0308,0309
Telenor ٹیلی نار	0336,0341,0342,0343,0344,0345,0346,0347	Warid وارد	0321,0322,0323,0324,0325
Ufone	0331,0332,0333,0334,0335.
Zong	0312, 0313, 0314, 0315
Instaphone Company Defunct	0364
SCOM (AJK & Northern Areas)	03555
Local (Northern Areas)	0581

Change in numbering system

From 1 April 2008 The Pakistan Telecommunication Authority (PTA) announced the successful migration of cellular mobile subscriber numbers from 7 to 8 digits. The dialing codes of all mobile companies were changed from 4 digits to 3 digits.
As part of new Mobile Numbering Plan, all mobile numbers in the country would consist of 8 digits by moving the last digit of the dialing code into subscriber number such that the dialing code would be reduced to 3 digits (i.e. 0333-51xxxxx would now be 033-351xxxxx).
Numbers of Mobilink, Warid, Ufone and Telenor will remain the same 11 digits as before. For Paktel - now Zong (China Mobile), Instaphone and SCOM (AJK& Northern Areas), in addition to aforementioned shifting of subscriber numbers, digits of their dialing code would also change (i.e. 0314-51xxxxx will be 031-451xxxxx, 0320-51xxxxx will be 036-451xxxxx and 0335-51xxxxx will be 035-551xxxxx).
These changes become effective from April 1, 2008. Until June 30, 2008 all old and new numbers could be dialed. From 1 July 2008 onwards only new numbers will be valid.

Wireless Provider	Mobile Code
Mobilink Jazz	0300
Zong	0313
Warid	0321
Ufone	0333
Telenor	0345
SCOM(AJK & Northern Areas)	0355
Instaphone	0366

References

1. ^ Home - Pakistan Telecommunication Authority

NOKIA::. TIPS & TRICKS

These Nokia codes will work on most Nokia Mobile Phones,

Code Description
*3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%

#3370# Deactivate Enhanced Full Rate Codec (EFR)

*4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.


#4720# Deactivate Half Rate Codec.

*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type.

*#9999# Phones software version if *#0000# does not work.

*#06# For checking the International Mobile Equipment Identity (IMEI Number).

#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

*#147# (vodafone) this lets you know who called you last.

*#1471# Last call (Only vodofone).

*#21# Allows you to check the number that "All Calls" are diverted to.

*#2640# Displays security code in use.

*#30# Lets you see the private number.

*#43# Allows you to check the "Call Waiting" status of your phone.

*#61# Allows you to check the number that "On No Reply" calls are diverted to.

*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to.

*#67# Allows you to check the number that "On Busy Calls" are diverted to.

*#67705646# Removes operator logo on 3310 & 3330.

*#73# Reset phone timers and game scores.

*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.

*#7760# Manufactures code.

*#7780# Restore factory settings.

*#8110# Software version for the nokia 8110.

*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.

*#94870345123456789# Deactivate the PWM-Mem.

**21*number# Turn on "All Calls" diverting to the phone number entered.

**61*number# Turn on "No Reply" diverting to the phone number entered.

**67*number# Turn on "On Busy" diverting to the phone number entered.

12345 This is the default security code.

press and hold # Lets you switch between lines.

All CDMA Codes

Here i post many codes for cdma phones …………………………
Samsung sph-n240, n400, a460, a500, etc Nam Programming:
Nam Set: ##Spc
Test Mode: 47*869#1235
Debug Menu: ##33284,ok
Service Menu: Menu+8+0 (#889)
Reset (Life time, Clear Memory, etc): ##786,ok
A-key: ##2539,ok
Label Selection: ##3882,ok
Label(Home, Work, etc) : **523,ok
NGG Setting (Gateway, etc.): ##2769737,ok
Vocoder: ##8626337,ok
CAI Change: ##7738,ok
Enable TTY: ##889,ok
Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming:
Nam Set: 47*869#08#9
Nam Set: Menu+60
Test Mode: *759#813580
Test Mode: 5809540*45680
A-key: Menu+0, 25##
External Audio: Menu+0, ####
Debug Menu: Menu+8, 0415 or Spc
Debug Menu: Menu+9, 0415 or Spc
Brief NAM Programing: Menu+40,626 (not all version)
LCD Contrast: Menu+45 (not all version)
SIO Mode: Menu+49
SIO Mode: Menu+69
Samsung a300, a530, a610, a620, a660, a670, etc Nam Programming:
Nam Set: Menu, 6, *
Service Menu: Menu, 9, *
Test Mode: 47*68#13580
Samsung X, E, V, S-series (korean), e250, v420, s250, etc Nam Programming:
Nam Set: 6548#0**4#6
Nam Set: 47*869#08#9
Nam Set: 74153697193
Test Mode: 5809540*45680 (88 – efs clear)
Debug Menu: Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415
Debug Menu: Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415
Samsung N356 (India version) Nam Programming:
Test Mode: Menu, 5, down arrow, *
Test Mode: **00## (in some flashes)
Samsung i700, etc Nam Programming:
Nam Set: Go to start and select “PHONE” from the drop down menu, dial #83587
Samsung i300, etc Nam Programming:
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. Enter OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice
TEST MODE COMMANDS:
n105_test_mode.txt
a500_test_mode.txt
a530_test_mode.txt
<>
——————————————————————————–
Qualcomm qcp-800 Nam Pogramming:
Nam Set: Menu+3+0+Spc
Field Test: Menu+7+0+Fsc
Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:
Nam Set: 111111+Jog Dial(Ok), Select “Programming”+Spc
CAI Change: ##7738,ok
Enable TTY: ##889,ok
Life Timer, PRL, etc: ##786,ok
A-key: ##2539,ok
A-key: 2539,ok
Tips:
On some kyocera handsets the factory service module has not been disabled
and the phone can be programmed without the spc by inputting.
Nam Set: ##333333 menu (service)
<>
——————————————————————————–
Sanyo 4900, 5150, 5300, 8100, etc Nam Programming:
Nam Set: ##Spc+Ok+Key Down+Ok
Advanced Setup: ##3282+Ok+Key Down+Ok+Msl
A-key: ##2539+Ok+Key Down+Ok
Version: ##**837+Ok+Key Down+Ok
Debug Menu: ##FSC+Ok+Key Down+Ok
Airtime menu: ##8463+Ok+Key Down+Ok
Change CAI: ##7738+Ok+Key Down+Ok
Vocoder: ##8626337+Ok+Key Down+Ok
Reverse Logistic: ##786+Ok+Key Down+Ok
Set IP Address: ##2769737+Ok+Key Down+Ok
TTY On/Off: ##889+Ok+Key Down+Ok
Ready Link: ##4636+Ok+Key Down+Ok
Browser Init On/Off: ##4682+Ok+Key Down+Ok
Picture Token: ##25327+Ok+Key Down+Ok
Unknown Code: ##5282277+Ok+Key Down+Ok
(SPC=000000, FSC=040793)
Sanyo scp-A011, smp-A017, etc Nam Programming:
Nam Set: F9(3 beep) + 0*72696#767
<>
——————————————————————————–
Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming:
Nam Set: *3001#12345#
Software Version: *#837#
Software Version: *#9999#
Esn Number: *#92772689#
Restart Phone: *#75681#
Restart Phone: *#75682#
Nokia 8887 Nam Programming:
Nam Set: *3001#12345#
Version: *#0000#
Evrc: *#8378#
Esn/Data/Timer: *#92772689#
SID: *#743#
Nokia 8587 Nam Programming:
Nam Set: *#626#7764726#
A-Key: #8159357022#4579# (26 digits)
A-Key: #8159357022#4547# (20 digits)
Version: *#0000#
Version: *#837#
Vocoder: *#3872#
Change language: Menu 5, 3, 1
Change DM mode: *#7678#
Debug Screen: *#8378#
Debug: *#8380#
Field Test Menu: *#83788#
SPC Unlock, Factory Reset:
Full Factory Reset: *#7370#
Resets all settings including non-user changeable items (like SPC)
NOKIA TEST MODE:
51xx, 61xx, 71xx, 3285, 63xx, etc:
1) Turn on the phone. Press *3001#12345#
2) Scroll up to where it says “Field Test” and choose SELECT
3) Highlight “Enable” and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll
down to “Field Test” choose SELECT. Press 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
“Field Test” choose SELECT. Press 0 0 and then choose OK.
3360, 6360:
1) Turn on the phone. Press *3001#12345#
2) Scroll up to where it says “Field Test” and choose SELECT
3) Highlight “Enable” and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll
down to “Field Test” choose SELECT. Press 2 1 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
“Field Test” choose SELECT. Press 2 1 0 0 and then choose OK.
<>
——————————————————————————–
Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming:
(Power the phone on and wait until the little light on top goes out)
Nam Set: 289+fcn+#+1
Service menu: fcn+00+fsc(000000)
Test Mode: Hold (2,*,Rcl)+Power
Test Mode Commands:
99 – download – flash phone
124 – inam data write
125 – version
126 – esn read
127 – sec_code
128 – lock_code
129 – is WFTV data write
137 – FSC code
138 – NPcode (nam program code)
139 – dscode
141 – restart
218 – Read_Addr
000 – is cdma mode
001 – is fm mode
002 – is pcs mode
008 – is reg read addr
020 – is lna_range
Audiovox pcx-3500xl Nam Programming:
Nam Set: ##2726+Send+1998+1+Spc+1
Audiovox cdm-100, 130, 135, 8300, 8500, 8600, etc Nam Programming:
Nam Set: ##20022002+Pwr+1+Spc
Audiovox 8610, 8910, etc Nam programming:
Name Set: ##847446, end, 111111
Audiovox-107 Nam Programming:
Nam Set: 45680*47*869#1
Audiovox CMP-3 Nam Programming:
Nam Set: 45680*47*869#1
Dm Mode: Menu, 6, 6
Audiovox 9950 Nam Programming:
Nam Set: ##3282
Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming:
Nam Set: m + # + envelope key + * + 1
Audiovox Thera (Toshiba 2032) Nam Programming:
Thera Nam Programming User Manual – nam_thera.pdf
AUDIOVOX TEST MODE:
9100, 9155:
1) Turn on the phone. As soon the phone comes on and the green light
turns off press RIGHTARROW, 0, 0. The phone will ask for the
“FSC Code”, press 000000 then choose OK and press RIGHTARROW,
RIGHTARROW. Your phone is now in test mode.
2) The signal strength is the number on the top right hand side of the screen.
3) To turn off test mode shut of the phone and then turn it back on.
<>
——————————————————————————–
Motorola 7760, 7860, 2260, 8160, etc Nam Programming:
Nam Set: Fcn,0000000000000, Rcl
Nam Set: 74663#, Fcn, Fcn
Test Mode: Fcn, 00**83786633, Sto
Motorola v60c, v120c etc Nam Programming:
Nam Set: 74663#, Menu, Menu, Spc
Nam Set: Menu, 073887, * (type quickly)
Test Mode: Menu, 073887*, Spc
Debug Mode: ##33284
Force the phone into DIGITAL ONLY mode:
1) ##33284 (Debug)
2) RIGHT Softkey (Next) Twice
3) Down arrow 10 times to “PrefMod”
4) RIGHT Softkey (Change) until you see “DigOnly”
5) LEFT softkey (Exit)
6) MENU then LEFT Softkey return to idle screen
7) ##33284 (The last 4 will not display if you have done it correctly)
Motorola t182, c210, etc Nam Programming:
Nam Set: ##1111 end
Nam Set: ##298645665 end
Short Nam: ##073887 sto
Motorola v710, v730, v740, ms150, etc Nam Programming:
Nam Set: 8378*# + press 3 times NATE (spc – 071082)
Test Mode: Menu, 073887*, Spc
Service Menu: #758353266#646#
Motorola StarTac 2004 Nam Programming:
Nam Set: 5759789*#, rec key (3)times (spc – 915037)
Motorola ms200, ms230, etc Nam Programming:
Nam Set: 5759789*# (spc – 915037)
Motorola v6060 Nam Programming:
Nam Set:147*369#456*0#
MOTOROLA TEST MODE:
v60, c120, c331, etc:
1) Turn on the phone. Press MENU 0 7 3 8 8 7 *
2) The phone will require you to “Enter a Security Code”, press 000000, OK
3) Scroll down to “Test mode” choose SELECT. Scroll down to “Enable”
choose SELECT. Your phone is now in test mode.
4) Signal strength is the 3_rd number down on the left hand side of the screen.
5) To toggle between regular mode and test mode: Press MODE then
quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.
6) To turn off the test mode the phone must be in regular mode, then follow
the above sequence and scroll down to where it says “DISABLE” instead of
“ENABLE” and choose select.
Motorola Bible – bible.txt
<>
——————————————————————————–
lgc-300, etc Nam Programming:
Nam Set: Menu, 9, Spc
A-key: Press “Sto” 3sec, 2539**
lgc-330w, etc Nam Programming:
Nam Set: Menu, 4, 0, Spc
A-key: 2539**
lgc-510, v111, etc Nam Programming:
Nam Set: Menu, 3, 0, Spc
A-key: 2539**
lgc-500, 800w, etc Nam Programming:
Nam Set: Menu, 9 , 0, Spc
Debug Mode: Menu, 7, 0, Fsc
Debug Mode: Menu, 8, 0, Fsc
A-key: 2539**
Lg LX,VX-series, VX4400, VX6000, etc Nam Programming:
Nam Set: ##Spc
Nam Set: Menu, 0
Advanced Settings: ##2342
Vocoder: ##8626337,ok
CAI Change: ##7738,ok
Enable TTY: ##889,ok
A-key: ##2539,ok
Reset (Life time, Clear Memory, etc): ##786,ok
<>
——————————————————————————–
Sky All Models Nam Programming:
Nam Set: #7583538324#626#
Nam Set: *759#364*7388464#
Min simple mode: #758353266#646#
Irm simple mode #758353266#476#
Voice memo: #8767#277#
Test Mode: #7583538324#8378#
A-key: #758353266#2539#
Service Menu: Menu+4+0+Spc
Service Menu: Menu+5+0+Spc
<>
——————————————————————————–
Withus wce-100, 200, 300, etc Nam Programming:
Nam Set: ##948487+Save
Nam Set: ##948482+Save
Nam Set: ##66835+Save
SMS Settings: ##76766
NVM Rebuild: ##777464
<>
——————————————————————————–
Hyundai hwp-110 Nam Programming:
Nam Set: #86904**89397#
DM Mode: ##2740*
(Open phone, inter code, close phone)
Hyundai hgc-120, 130, 200 Nam Programming:
Nam Set: #86904**89397#
Hyundai hgc-310, 600, 610 Nam Programming:
Nam Set: ##20022002+Pwr+1+Spc Code
Field Test: ##20022002+Pwr+1+Master Code
Hyundai Curitel h-100, 150, hx-510b, 520 Nam Programming:
Nam Set: ##20022002+Pwr+1+Spc Code
Field Test: ##20022002+Pwr+1+Master Code
A-key: 2539**
Debug Menu: ##27732726+Pwr
Sar Test: ##27752345+Pwr
Baud Rate: ##36**+Pwr
DM Mode Enable: **1004+Pwr
DS Mode Enable: **1005+Pwr
Test Bell/Voice/Led/Dot: ##1122+Pwr
RF Mode: ##2240+Pwr
Ras Ram: ##2774+Pwr
Cmux1: **0481+Pwr
Cmux2: **0482+Pwr
RX Mode Fax: **0492+Pwr
RX Mode Data: **0491+Pwr
RX Mode Reset: **0490+Pwr
<>
——————————————————————————–
Huawei ETS-668, 678, 688, etc Nam Programming:
Debug Mode: ##44+Menu
Debug Screen: ##33+Menu
CDG2 Test enable: ##234+Menu
CDG2 Test disable: ##432+Menu
China Lang Select: ##123+Menu
Blocking Debug Code: ###888+Menu
Home System Only On: ##461+Menu
Home System Only Off: ##460+Menu
<>
——————————————————————————–
Ericsson A1228c, T61, etc Nam Programming:
Short NAM: 987+Menu
Long NAM: 923885+Menu+Spc
CDMA Mode: 904093+Menu
Analog Mode: 904095+Menu
QNC: 904097+Menu
Debug Screen: 904090+Menu
DM Mode: 904050+Menu
Sony-Ericsson T608 Nam Programming:
Nam Set: 923885, Joystick to the right, 111111
<>
——————————————————————————–
Epsilon vc-5x Nam Programming:
Nam Set: **147258963##
Programming1: **1232580##
Programming2: **321456987##
Version: **1470963##
Debug: **000000##
Menu_1: **078987##
Menu_2: **1234756##
A-key: 2539**
Reset: **14789##
<>
——————————————————————————–
VK-100C, 110C, 200C, etc Nam Programming:
Nam Set: 153147539741593
Test Mode: 153147539123258 (88 – clear efs)
<>
——————————————————————————–
Z510, Z710i(gcd-456) Nam Programming:
Nam Set: Menu+0+Spc
<>
——————————————————————————–
AMC450 Nam Programming:
Nam Set: *74269#*748#96148063+SEL
<>
——————————————————————————–
Gtran gcp-2000 Nam Programming:
Nam Set: 01#737+Spc
Debug Menu: 01#324+Spc
Debug Mode: 01#727
Test Mode: 01#764+Spc
System Test Mode: 01#768+Spc
Gtran gcp-5000 Nam Programming:
Debug Mode: 01#727+Spc
Test Mode: 01#765
<
>
——————————————————————————–
PANASONIC TEST MODE:
Panasonic (Most):
1) Turn on the phone. Press #7764726# choose SEND
2) Scroll down to where it says “NAM 1″ and choose OK. Scroll down
to “Access To Level 4″ choose YES. Scroll down to “Built-In-Monitor”
and choose EDIT.
3) Press 1 and choose OK then choose BACK. The phone will say
“Back To Level 1″ choose YES. Now choose EXIT the phone will ask you
“Exit And Save Change” choose YES.
4) Signal strength is the top right number on the screen.
5) To turn off the test mode follow the above sequence except press 0
instead of 1 at the “Built-In-Monitor”
<>
——————————————————————————–
Synertek S200 Nam Programming:
Nam Set: Menu+0+Spc
Debug Mode:
Test vibro/rx/tx: ##5555+Save
Debug Screen: ##33+Save
Debug Screen: ##523+Save
RF Test: ####+Save
Unknown code: ##325+Save
<>

Mobilink Jazz Tricks.

*...; Jazz customers happy news''' check free balance just dial *33*0000#.

*...; Jazz free net: jazzwap. mobilinkworld.com
IP; 172.24.97.29 port. 8080

*...; For Mobilink. Dial *101*1*4# sms expired date increase.

Telenor Tricks.

*345*8*1# Telenor free emergency sms. Agr aap ka balance katam hai to ap apny doston ko free mai messege send kar skty hain. plz call back.



*...; Telenor free GPRS. Port6. now cteate new internet connevtion using your installed modem. Isp name; ''TELENOT FREE'' Dialup number; *99#



*...; Urdu Translation for Telenor Tricks.

Aap 345 dial krain wahan value added service menu main jain aur music box open karin. wahan ap ko imformaation milain ge package ha baton press karin us kay bad who app ko sms baijain gay 440. laiken ap reply na karna phir 440 dail karain aur 1 press karin free music sunain.

*...; Hide your number show other unknown number. or pribate nmuber. dial 00448700360419p00923331234567 Rs. 15+taxes charges.

*...; DJUICE now offer 700 sms and 10 free mint. only Rs. 12+tax
Format'; *345*10#

*...; TELENOR Customers. Dial 555ppp2p1 for free balance check.

*...; TELENOR Customers. Dial 555ppp2p2 for free sms balance check.

Warid GSM Tricks (Pakistan)

This is WARID free smsc +975467235572 enjoy. But first +92.

*...; Hide your number show other unknown number. or pribate number. Dial 00448700360419p00923331234567 Rs. 15+tax Charges.

*...; Get free Warid sms score like cricket, score, horoscope, etc e.g. just type CKT and send 12320. No charges

*...; Solid and Latest Tricks for Warid userz type Help, Help1 and Help2 send it to 12320 and get free Breaking-News.

NOKIA Mobile Phone Secret Codes

On the main screen type.

*#06# for checking the IMEI (International Mobile Equipment Identity).

*#7780# rest to facory settings.

*#67705646# this will clear the LCD display (operator logo).

*#0000# To view software version.

*#2820# Bluetooth device address.

*#746025625# Sim clock allowed status.

*#62209526# Display the MAC address of the WLAN adapter. This is available only in the newer devices that supports WLAN like N82.

#pw+1234567890+1# Shows if sim have restrictions.

*#92702689# Takes you to a secret menu were you may find some of the information below;
1. Displays serial number.
2. Displays the month and year of manufacture.
3. Displays (if there) the date where the phone was purchased (MMYY).
4. Displays the date of the last repair - if found (0000).
5. Shows life timer of phone (time passes since last start).

*#3370# - Enhanced full rate codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.

*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30fised because phone receives less signal from network.

*#4720# - Half rate codec activation.

*#4720* - Half rate codec deactivation. The phone will automatically restart.

*#3925538# - Press to delete the contents and code of wallet.

*#7328748263373738# - Resets security code. Default secutity code is 12345

Unlock servece provider; Insert sim, turn phone on and press vol up (arrow keys) for 3 seconds, should say pin code. Press C, then press * message should flash, press * again and 04*pin*pin*pin#
Press and hold ''0'' on the main screen to open wap browser.
Important!
Try these codes at your own risk! We don't accept any complaints.
some of these codes may not work.